12.3 Inch LCD/LED Module AM Local Dimming Customized 64*24 Dam Construction

customized LCD Module for fuel dispenser VA TFT STN OLED industrial display
 

Product Description

​

Local dimming introduction

Local dimming is a feature commonly used in LCD (Liquid Crystal Display) panels, and AM refers to the active matrix technology used in LCD displays.

Local dimming is a technique used to enhance the contrast and black levels of an LCD display by controlling the backlighting behind specific areas of the screen. It involves dividing the backlight into different zones and dynamically adjusting the brightness of each zone based on the content being displayed.

With local dimming, when a specific part of the screen needs to display a darker image or black content, the LEDs (Light-Emitting Diodes) behind that area can be dimmed or turned off, resulting in deeper blacks and improved contrast. Conversely, when brighter content is displayed, the LEDs behind the corresponding zones can be brightened to enhance the overall brightness and maintain image clarity.

Active matrix (AM) is a technology used in LCD displays to control each individual pixel. It utilizes a thin-film transistor (TFT) for each pixel, allowing precise control of the liquid crystal molecules that determine the light transmission properties of the display. This enables faster response times, higher refresh rates, and improved image quality compared to passive matrix displays.

By combining local dimming with active matrix technology, LCD displays can achieve better contrast ratios, deeper blacks, and improved overall image quality. Local dimming is particularly beneficial in high dynamic range (HDR) displays, where a wider range of brightness levels is required to produce more vibrant and realistic images.

LED in dam construction introduction

LED in dam construction process primarily refers to LED lighting. LED technology offers the following characteristics and advantages in dam lighting:

High Brightness: LED fixtures provide high brightness, ensuring adequate illumination in the dam area during nighttime or low-light conditions, ensuring good visibility.

Energy Efficiency and Durability: LED lighting has higher energy efficiency and longer lifespan compared to traditional lighting. They provide the same or better illumination with lower energy consumption, reducing the frequency of replacement and maintenance.

Dimming Capability: LED fixtures typically have good dimming capabilities, allowing the adjustment of brightness according to specific lighting requirements.

Vibration Resistance and Environmental Adaptability: LED fixtures exhibit good resistance to vibrations and can operate reliably in dam environments with vibrations. They are also suitable for various harsh conditions such as high temperatures, low temperatures, and humidity, making them well-suited for dam construction projects.

In dam construction, LED lighting is primarily used on the top, sides, or other areas requiring illumination. They provide sufficient lighting to ensure the safety of construction personnel while enhancing visibility and aesthetics of the dam.

It's important to note that in addition to LED lighting applications, LED display screens (such as the previously mentioned LED displays) can also be used in dam construction to display information, indicators, and real-time status and operational guidance. LED technology's application in dam construction not only enhances lighting effectiveness but also offers advantages such as energy efficiency and environmental friendliness.

Item	STANDARD Value
AA size	12.3 inch
AA size	292.032*109.512 mm
zone amount	1536
led chip amount	1536
partitioning process	dam construction
local dimming structure	active matrix
array	64*24
LED/chip number	0509
Top & Tst	-40C ~ +85˚C &-40˚C-~+90˚C

​

Our Advantages

1. We specializing in the design, development and production of LCD display module full scheme for more than 10years. Each product undergoes professional design, debugging, production and quality inspection to ensure that the product meets shipping standards.
2. Broad selection of off the shelf products can be chosen and most products are kept in stock and can ship same day.
3. We also offer customed services for you, and can provide drawings and procedures for customers to confirm.
4. Our products offer sunlight readable options , and each display offers capacitive and resistive options
5. We provide reliable warranty service and the warranty preriod is one year.

​

Packaging & Shipping

Packaging : All the products are packed in right way to keep it safe. For small sizes of products we often use tray + carton, and for bigger sizes we use foam slot + carton. Also we can design packages to meet customers' requirements.
​

Shipping : For small quantity orders: We often ship by UPS Air-Express, or DHL/FEDEX/TNT/ EMS Express service. And For large quantity orders: we ship by buyer's cargo agent in China. Also, we can ship by air or sea transportation by our cargo agent.

Delivery Time:

Ready-made Sample: within 1 week

Custom Sample: 1~2 weeks

Mass production: 3-4 weeks
​

FAQ

1. Do you offer customized service?
-Yes, we offer OEM&ODM service and send us your requirements.

2. What payment methods do you accept?
-We accept via TT/West Union/Paypal.

3.Do you provide samples?
-Yes, we offer sample but you need to pay sample fee and delivery fee.

4. How long does it take to produce the product?
-It depends on the product you need. Different needs determine the production time

5. What's the process for placing an order?
-PO is placed by clients → PI is issued by Royal Display → Payment by clients → Lead time is confirmed by Royal Display → Shipping instrction by Clients → Delivery → Cargo tracking → Receipt of cargo

 

​